Please use this identifier to cite or link to this item: https://idr.l1.nitk.ac.in/jspui/handle/123456789/10639
Full metadata record
DC FieldValueLanguage
dc.contributor.authorDavanageri, M.
dc.contributor.authorNarendranath, S.
dc.contributor.authorKadoli, R.
dc.date.accessioned2020-03-31T08:22:51Z-
dc.date.available2020-03-31T08:22:51Z-
dc.date.issued2016
dc.identifier.citationArchives of Foundry Engineering, 2016, Vol.16, 4, pp.47-56en_US
dc.identifier.urihttp://idr.nitk.ac.in/jspui/handle/123456789/10639-
dc.description.abstractThe dry sliding wear behavior of heat-treated super duplex stainless steel AISI 2507 was examined by taking pin-on-disc type of wear-test rig. Independent parameters, namely applied load, sliding distance, and sliding speed, influence mainly the wear rate of super duplex stainless steel. The said material was heat treated to a temperature of 850 C for 1 hour followed by water quenching. The heat treatment was carried out to precipitate the secondary sigma phase formation. Experiments were conducted to study the influence of independent parameters set at three factor levels using the L27 orthogonal array of the Taguchi experimental design on the wear rate. Statistical significance of both individual and combined factor effects was determined for specific wear rate. Surface plots were drawn to explain the behavior of independent variables on the measured wear rate. Statistically, the models were validated using the analysis of variance test. Multiple non-linear regression equations were derived for wear rate expressed as non-linear functions of independent variables. Further, the prediction accuracy of the developed regression equation was tested with the actual experiments. The independent parameters responsible for the desired minimum wear rate were determined by using the desirability function approach. The worn-out surface characteristics obtained for the minimum wear rate was examined using the scanning electron microscope. The desired smooth surface was obtained for the determined optimal condition by desirability function approach. 2016 M. Davanageri et al., published by De Gruyter Open 2016.en_US
dc.titleDry Sliding Wear Behavior of Super Duplex Stainless Steel AISI 2507: A Statistical Approachen_US
dc.typeArticleen_US
Appears in Collections:1. Journal Articles

Files in This Item:
There are no files associated with this item.


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.