Please use this identifier to cite or link to this item: https://idr.l1.nitk.ac.in/jspui/handle/123456789/11199
Full metadata record
DC FieldValueLanguage
dc.contributor.authorPandit, P.
dc.contributor.authorVenkataramana, K.
dc.contributor.authorBabunarayan, K.S.
dc.contributor.authorParla, B.
dc.contributor.authorKimura, Y.
dc.date.accessioned2020-03-31T08:30:54Z-
dc.date.available2020-03-31T08:30:54Z-
dc.date.issued2014
dc.identifier.citationInternational Journal of Earth Sciences and Engineering, 2014, Vol.7, 1, pp.320-324en_US
dc.identifier.urihttp://idr.nitk.ac.in/jspui/handle/123456789/11199-
dc.description.abstractRC structures are generally very durable and are capable of withstanding a variety of adverse environmental conditions. However, failures of these structures still occur and reinforcement corrosion is one of the major causes. In the present research, corroded Ordinary Portland Cement (OPC) beams were tested in the laboratory to evaluate their flexural behavior. Accelerated corrosion technique was adopted to corrode the beams. The corrosion was measured using Applied Corrosion Monitoring (ACM) instrument. From the results, it is seen that, as the rate of corrosion increases, the load carrying capacity decreases. The deflection increases initially and then decreases. It is observed that the stiffness of the beams is reduced when rate of corrosion is increased due to changes in the modulus of elasticity of corroded steel. 2014 CAFET-INNOVA TECHNICAL SOCIETY.en_US
dc.titleExperimental studies on the effects of corrosion on the flexural strength of RC beamsen_US
dc.typeArticleen_US
Appears in Collections:1. Journal Articles

Files in This Item:
There are no files associated with this item.


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.