Please use this identifier to cite or link to this item: https://idr.l1.nitk.ac.in/jspui/handle/123456789/13574
Full metadata record
DC FieldValueLanguage
dc.contributor.authorSona, M.-
dc.contributor.authorTikale, S.-
dc.contributor.authorPrabhu, N.-
dc.date.accessioned2020-03-31T08:48:12Z-
dc.date.available2020-03-31T08:48:12Z-
dc.date.issued2019-
dc.identifier.citationTransactions of the Indian Institute of Metals, 2019, Vol.72, 6, pp.1579-1583en_US
dc.identifier.uri10.1007/s12666-019-01568-5-
dc.identifier.urihttp://idr.nitk.ac.in/jspui/handle/123456789/13574-
dc.description.abstractIn the present study, wettability, interfacial intermetallic growth and shear strength of Sn�Cu eutectic solder solidified on bare as well as nickel-coated copper substrates were examined. Sn�0.7Cu solder was reflowed over the substrate for reflow times ranging from 10 to 500�s at 270��C. Samples were cooled by quenching in water. The wetting behavior was similar on both the substrates. The corresponding time period to the end of gravity zone (Tgz) was measured from the relaxation curve obtained from wetting studies. Tgz was found to be 25�s for Sn�0.7Cu on bare and 50�s on Ni-coated copper substrates. The intermetallic compound layer thickness was fitted to a growth model to study the growth kinetics. The integrity of solder/substrate joint was assessed by performing ball as well as single-lap joint shear tests. The shear strength was found to be maximum at Tgz for all solder/substrate systems. � 2019, The Indian Institute of Metals - IIM.en_US
dc.titleWettability, Interfacial Intermetallic Growth and Joint Shear Strength of Eutectic Sn�Cu Solder Reflowed on Bare and Nickel-Coated Copper Substratesen_US
dc.typeArticleen_US
Appears in Collections:1. Journal Articles

Files in This Item:
File Description SizeFormat 
18 Wettability, Interfacial Intermetallic.pdf955.92 kBAdobe PDFThumbnail
View/Open


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.