Please use this identifier to cite or link to this item: https://idr.l1.nitk.ac.in/jspui/handle/123456789/14924
Full metadata record
DC FieldValueLanguage
dc.contributor.authorManoj I.V.
dc.contributor.authorNarendranath S.
dc.date.accessioned2021-05-05T10:16:00Z-
dc.date.available2021-05-05T10:16:00Z-
dc.date.issued2021
dc.identifier.citationIOP Conference Series: Materials Science and Engineering , Vol. 1065 , 1 , p. -en_US
dc.identifier.urihttps://doi.org/10.1088/1757-899X/1065/1/012011
dc.identifier.urihttp://idr.nitk.ac.in/jspui/handle/123456789/14924-
dc.description.abstractWire electric discharge machining non-conventional process that removes materials by thermal erosion. Tapering in WEDM has many applications in machining accurate geometric profiles. In the present investigation, a slant type taper machining was performed to produce taper profiles with the help of the slant fixture. The machining parameters such as wire guide distance, corner dwell time, wire offset and cutting speed override was employed to find the variation in the taper profile area. A simple square profile of 1mm, 3mm and 5mm was machined at different slant angles namely 0°, 15° and 30°. It was observed that each parameter yielded different profile areas. The artificial neural network was used for the forecasting the areas of 1mm, 3mm and 5mm square for different parameters. The optimum artificial neural network model was experimentally validated and the errors were ranging from 0-10%. © Published under licence by IOP Publishing Ltd.en_US
dc.titleMachining and forecasting of square profile areas using artificial neural modelling at different slant angles by WEDM.en_US
dc.typeConference Paperen_US
Appears in Collections:2. Conference Papers

Files in This Item:
There are no files associated with this item.


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.