Please use this identifier to cite or link to this item: https://idr.l1.nitk.ac.in/jspui/handle/123456789/7832
Full metadata record
DC FieldValueLanguage
dc.contributor.authorShivaprasad, K.N.
dc.contributor.authorDas, B.B.
dc.date.accessioned2020-03-30T10:02:53Z-
dc.date.available2020-03-30T10:02:53Z-
dc.date.issued2018
dc.identifier.citationIOP Conference Series: Materials Science and Engineering, 2018, Vol.431, 9, pp.-en_US
dc.identifier.urihttp://idr.nitk.ac.in/jspui/handle/123456789/7832-
dc.description.abstractThis paper presents the results of an experimental investigation on the production of artificial fly ash aggregates through the process of pelletization. The alkaline solutions like sodium silicate and sodium hydroxide was used to activate the fly ash. The alkaline solution contains 4.5% of Na2O, Si2O/Na2O ratio of 0.3 and 20% of water content with respect to mass of fly ash were used as binder in the production of fly ash geopolymer aggregates. The experiments were conducted by varying with different parameters. Curing of artificial fly ash aggregates was done with ambient temperature and heat curing (60 to 80 �C). Six levels of duration of heat curing were considered for this study. The optimum temperature and duration of curing is essential in geopolymerization reaction to achieve good characteristics of the produced aggregates. Grey relation analysis was performed to identify the effect of heat curing. Test results and grey relation analysis shows that the characteristics of the artificial produced fly ash aggregates has significantly improved with increase in temperature and duration of oven curing. � 2018 Institute of Physics Publishing. All rights reserved.en_US
dc.titleEffect of Duration of Heat Curing on the Artificially Produced Fly Ash Aggregatesen_US
dc.typeBook chapteren_US
Appears in Collections:2. Conference Papers

Files in This Item:
There are no files associated with this item.


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.