Please use this identifier to cite or link to this item: https://idr.l1.nitk.ac.in/jspui/handle/123456789/7880
Full metadata record
DC FieldValueLanguage
dc.contributor.authorDavanageri, M.B.
dc.contributor.authorNarendranath, S.
dc.contributor.authorKadoli, R.
dc.date.accessioned2020-03-30T10:03:00Z-
dc.date.available2020-03-30T10:03:00Z-
dc.date.issued2017
dc.identifier.citationMaterials Today: Proceedings, 2017, Vol.4, 9, pp.10189-10196en_US
dc.identifier.urihttp://idr.nitk.ac.in/jspui/handle/123456789/7880-
dc.description.abstractIn this paper, the wear behaviour of heat treated (oil and water quenched) super duplex stainless steel (SDSS) AISI 2507 was studied using dry sliding wear test rig. Initially as received materials was solution treated at 1050�C for duration of 2 h to achieve a balanced austenite (?) and ferrite (?) microstructure. The effect of different heat treatment techniques on microstructure and wear behaviour was studied by heat treating specimen at 850�C for duration of 1 h and was followed by oil and water quenching. The microstructure and crystal structure were studied through scanning electron microscope (SEM) and X-ray diffraction. The sliding wear test was employed with variation in load and speed at constant sliding distance. The results reveal that wear rate increased with increase in wear parameters. The oil quenched exhibited better wear resistance than water quenched and solution treated specimen. The worn surface morphology were analysed through SEM micrographs. � 2017 Elsevier Ltd.en_US
dc.titleEffect of Sigma (?) phase on Mechanical and Dry sliding wearen_US
dc.typeBook chapteren_US
Appears in Collections:2. Conference Papers

Files in This Item:
There are no files associated with this item.


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.