Please use this identifier to cite or link to this item: https://idr.l1.nitk.ac.in/jspui/handle/123456789/7999
Full metadata record
DC FieldValueLanguage
dc.contributor.authorVasu, M.
dc.contributor.authorNayaka, H.S.
dc.date.accessioned2020-03-30T10:03:18Z-
dc.date.available2020-03-30T10:03:18Z-
dc.date.issued2018
dc.identifier.citationMaterials Today: Proceedings, 2018, Vol.5, 9, pp.16893-16903en_US
dc.identifier.urihttp://idr.nitk.ac.in/jspui/handle/123456789/7999-
dc.description.abstractSpring steel (EN47) samples are machined (turning) using Sandvik make coated tungsten carbide tool insert with different nose radii (0.4 and 0.8mm) in dry condition and the results are compared with each other. Spring steel is widely used in the manufacturing of vehicle components such as crankshaft, knuckle and leaf spring. EN47 spring steel material is relatively low cost compare to other alloy steels. Experiments are conducted based on taguchi L9 technique. Input parameters are cutting speed, feed rate and depth of cut. The corresponding output parameters are cutting force, surface roughness and tool tip temperature have been analyzed. Experimental result reveals that better surface roughness obtained with higher nose radius. ANOVA results confirm that cutting force is influenced by depth of cut (ap), surface roughness is influenced by feed rate (f) and tooltip temperature is influenced by cutting speed (Vc). Chip morphology and machined surface samples are analyzed using scanning electron microscope (SEM). � 2018 Elsevier Ltd.en_US
dc.titleComparative study of turning process on EN47 spring steel with different nose radii using statistical techniqueen_US
dc.typeBook chapteren_US
Appears in Collections:2. Conference Papers

Files in This Item:
There are no files associated with this item.


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.