Please use this identifier to cite or link to this item: https://idr.l1.nitk.ac.in/jspui/handle/123456789/8204
Title: High-Performance NoCs Employing the DSP48E1 Blocks of the Xilinx FPGAs
Authors: Prabhu, P.B.M.
Parane, K.
Talawar, B.
Issue Date: 2019
Citation: Proceedings - International Symposium on Quality Electronic Design, ISQED, 2019, Vol.2019-March, , pp.163-169
Abstract: The hard multiplexers of the Xilinx DSP48E1 slices have been employed to support the functionality of crossbar switch of the buffered five port Network-on-Chip (NoC) routers. This is possible due to the dynamic mode operation of the DSP48E1 slices per clock cycle based on the multiplexer control signals. As a result of this, a significant reduction in the soft logic (LUT+FF) utilization of the FPGA implementation of the 6� 6 Mesh topology has been observed. DSP based crossbar implementation of the 6� 6 Mesh topology consumes 36% fewer LUTs and 40% fewer FFs than the LUT based crossbar implementation. 38% less power consumption has been observed in the DSP based implementation. The proposed work utilizes 41% fewer LUTs compared to the state-of-the-art CON-NECT NoC generation tool. The latency reductions of 31% and 38% have been achieved by the proposed DSP48E1 based crossbar implementation over the LUT crossbar implementation of 8� 8 Mesh topology under the Uniform and Transpose traffic patterns. Also, the proposed DSP48E1 based implementation achieves the saturation throughput improvements of 1.4� and 1.6� over the LUT based implementation under Uniform and Transpose traffic patterns respectively. � 2019 IEEE.
URI: http://idr.nitk.ac.in/jspui/handle/123456789/8204
Appears in Collections:2. Conference Papers

Files in This Item:
There are no files associated with this item.


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.