Influence of modified cutting inserts in machining of Ti-6Al-4V alloy using PCD insert

Abstract

In modern manufacturing industries, the emerging needs of modern metal cutting operation are to increase the tool life with good surface finish and higher material removal rate. These objectives can be achieved by reducing the cutting temperature at the cutting zones with proper cooling system. The present work involves the experimental study of MQL application through the micro-holes drilled on the cutting inserts during turning of Ti-6Al-4V alloy using PCD inserts. The effect of the micropool lubrication of cutting insert on cutting temperature, surface roughness and tool wear have been compared with normal insert machining. It has been observed that in micropool lubrication method, cutting temperature was reduced by 30-33% over normal insert machining. Micropool lubrication reduced the flank wear to a maximum of about 20-30% over normal insert machining. The experimental result of the current research work indicates considerable benefits of surface roughness and tool wear through reduction in cutting temperature due to the perforation of the cutting insert. � 2018 Elsevier Ltd. All rights reserved.