Please use this identifier to cite or link to this item: https://idr.l1.nitk.ac.in/jspui/handle/123456789/9798
Full metadata record
DC FieldValueLanguage
dc.contributor.authorSingh, A.K.-
dc.contributor.authorSaltonstall, B.-
dc.contributor.authorPatil, B.-
dc.contributor.authorHoffmann, N.-
dc.contributor.authorDoddamani, M.-
dc.contributor.authorGupta, N.-
dc.date.accessioned2020-03-31T06:51:28Z-
dc.date.available2020-03-31T06:51:28Z-
dc.date.issued2018-
dc.identifier.citationJOM, 2018, Vol.70, 3, pp.310-314en_US
dc.identifier.uri10.1007/s11837-017-2731-x-
dc.identifier.urihttps://idr.nitk.ac.in/jspui/handle/123456789/9798-
dc.description.abstractHigh-density polyethylene (HDPE) and its fly ash cenosphere-filled syntactic foam filaments have been recently developed. These filaments are used for three-dimensional (3D) printing using a commercial printer. The developed syntactic foam filament (HDPE40) contains 40 wt.% cenospheres in the HDPE matrix. Printing parameters for HDPE and HDPE40 were optimized for use in widely available commercial printers, and specimens were three-dimensionally (3D) printed for tensile testing at strain rate of 10?3 s?1. Process optimization resulted in smooth operation of the 3D printer without nozzle clogging or cenosphere fracture during the printing process. Characterization results revealed that the tensile modulus values of 3D-printed HDPE and HDPE40 specimens were higher than those of injection-molded specimens, while the tensile strength was comparable, but the fracture strain and density were lower. 2018, The Minerals, Metals & Materials Society.en_US
dc.titleAdditive Manufacturing of Syntactic Foams: Part 2: Specimen Printing and Mechanical Property Characterizationen_US
dc.typeArticleen_US
Appears in Collections:1. Journal Articles

Files in This Item:
File Description SizeFormat 
14 Additive Manufacturing of Syntactic.pdf1.41 MBAdobe PDFThumbnail
View/Open


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.