Please use this identifier to cite or link to this item: https://idr.l1.nitk.ac.in/jspui/handle/123456789/10415
Title: Corrosion Behavior of ECAP-Processed AM90 Magnesium Alloy
Authors: Gopi, K.R.
Nayaka, H.S.
Sahu, S.
Issue Date: 2018
Citation: Arabian Journal for Science and Engineering, 2018, Vol.43, 9, pp.4871-4878
Abstract: Magnesium AM90 alloy was subjected to equal-channel angular pressing (ECAP) using route B C. Microstructural characterization revealed refined grains having average grain size ?3?m after ECAP 4 passes. Samples were subjected to electrochemical measurements to study the corrosion behavior. Potentiodynamic polarization test showed reduced corrosion current density (Icorr) for processed samples up to ECAP 3 pass due to grain refinement. Electrochemical impedance spectroscopy showed an increase in the diameter of the capacitive arcs and charge-transfer resistance (Rt) for ECAP-processed 3 pass sample indicating the reduction in corrosion rate. Increase in corrosion resistance is due to refined microstructure and uniform distribution of secondary particles forming a protective passivation layer (Mg (OH) 2) on the sample s surface. Immersion test indicated lower hydrogen evolution from ECAP-processed samples compared to the unprocessed condition indicating decreased corrosion rate. 2018, King Fahd University of Petroleum & Minerals.
URI: http://idr.nitk.ac.in/jspui/handle/123456789/10415
Appears in Collections:1. Journal Articles

Files in This Item:
There are no files associated with this item.


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.