Please use this identifier to cite or link to this item: https://idr.l1.nitk.ac.in/jspui/handle/123456789/10685
Full metadata record
DC FieldValueLanguage
dc.contributor.authorPatil, B.-
dc.contributor.authorBharath, Kumar, B.R.-
dc.contributor.authorBontha, S.-
dc.contributor.authorBalla, V.K.-
dc.contributor.authorPowar, S.-
dc.contributor.authorHemanth, Kumar, V.-
dc.contributor.authorSuresha, S.N.-
dc.contributor.authorDoddamani, M.-
dc.date.accessioned2020-03-31T08:22:54Z-
dc.date.available2020-03-31T08:22:54Z-
dc.date.issued2019-
dc.identifier.citationComposites Science and Technology, 2019, Vol.183, , pp.-en_US
dc.identifier.urihttps://idr.nitk.ac.in/jspui/handle/123456789/10685-
dc.description.abstractEnvironmentally pollutant fly ash cenospheres (hollow microballoons) are utilized with most widely consumed, relatively expensive high density polyethylene (HDPE) for developing lightweight eco-friendly filament for 3D printing of closed cell foams. Cenospheres (20, 40 and 60 by volume %) are blended with HDPE and subsequently extruded in filament to be used for 3D printing. Cenosphere/HDPE blends are studied for melt flow index (MFI) and rheological properties. MFI decreases with cenospheres addition. Complex viscosity, storage and loss modulus increase with filler loading. DSC results on the filament and printed samples reveal increasing crystallization temperature and decreasing crystallinity % with no appreciable change in peak melting temperature. Cooling rate variations exhibit crystallinity differences between the filament and the prints. CTE decreases with increasing cenosphere content resulting in lower thermal stresses and under diffusion of raster leading to non-warped prints. Micrography on freeze fractured filament and prints show cenospheres uniform distribution in HDPE. Intact cenospheres lower the foam density making it lightweight. Tensile tests are carried out on filaments and printed samples while flexural properties are investigated for 3D prints. Cenospheres addition resulted in improved tensile modulus and decreased filament strength. Tensile and flexural modulus of printed foams increases with filler content. Results are also compared with injection molded samples. Printed foams registered comparable tensile strength. Specific tensile modulus is noted to be increased with cenospheres loading implying weight saving potential of 3D printed foams. Property map reveals printed foams advantage over other fillers and HDPE composites synthesized through injection and compression molding. 2019 Elsevier Ltden_US
dc.titleEco-friendly lightweight filament synthesis and mechanical characterization of additively manufactured closed cell foamsen_US
dc.typeArticleen_US
Appears in Collections:1. Journal Articles

Files in This Item:
File Description SizeFormat 
37 Eco-friendly lightweight.pdf5.27 MBAdobe PDFThumbnail
View/Open


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.