Please use this identifier to cite or link to this item: https://idr.l1.nitk.ac.in/jspui/handle/123456789/14755
Title: Effect of plastic strain and processing routes on the hardness of as-cast aluminum
Authors: Valder J.
Malayathodi R.
Kumar P.
Rajasekaran S.
Raju K.
Surendranathan A.O.
Issue Date: 2020
Citation: AIP Conference Proceedings , Vol. 2236 , , p. -
Abstract: In the present study, Equal Channel Angular Pressing (ECAP) of commercially pure aluminum (Al) in the cast form was carried out at room temperature for assessing its hardness by different routes and passes. The different routes employed in the present investigation are A, BA, BC and C. The Al specimens were pressed by a die of 150° channel angle without back pressure with Molybdenum disulfide (MoS2) as the lubricant. ECAP has significantly improved the hardness of Al in the subsequent passes. It has been observed that the hardness has been increased after first pass at room temperature from 47 VHN in the annealed condition to 54 VHN and after the second pass the hardness value has been increased to 56, 57, 62 and 56 VHN for routes A, BA, BC and C respectively. The increase in the hardness may be attributed to the severe fragmentation of microstructure of cast Al and the change in the orientation of the specimen from one pass to the next pass. After one pass, the dendritic microstructure of cast Al has been distorted by the shear stress developed during deformation. The processing by different routeswith number of passes has further refined the microstructure leading to a better hardness in the cast Al. © 2020 Author(s).
URI: https://doi.org/10.1063/5.0007404
http://idr.nitk.ac.in/jspui/handle/123456789/14755
Appears in Collections:2. Conference Papers

Files in This Item:
There are no files associated with this item.


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.