Please use this identifier to cite or link to this item: https://idr.l1.nitk.ac.in/jspui/handle/123456789/15441
Title: Experimental and numerical investigation of novel V-shaped rotor for hydropower utilization
Authors: C M S.
Honnasiddaiah R.
Hindasageri V.
Madav V.
Issue Date: 2021
Citation: Ocean Engineering Vol. 224 , , p. -
Abstract: Hydrokinetic technologies harvest renewable power by harnessing the kinetic energy of water from free-flowing rivers, streams, dam head/tailrace and irrigation channels. Savonius rotor is one of the simple and low-cost vertical axis drag type devices used for the extraction of hydrokinetic power. The main limitation of Savonius hydrokinetic turbine is its low efficiency due to negative torque developed by the returning blade without augmentation techniques. In this paper, an experimental investigation is carried out in a multipurpose tilting water flume using V-shaped rotor blade profiles by maintaining a fixed V-angle of 90°, varying length of V-edges, arc radius and with a constant aspect ratio of 0.7. The simulations were carried out using commercial software, ANSYS Fluent. From the experimental and numerical results, it was found that, the optimum blade profile (V4) has developed a maximum coefficient of power 0.22 and 0.21 respectively, at a tip speed ratio 0.87. It was found that, the maximum coefficient of power of optimal V-shaped blade profile (V4) is 19.3% higher than the semi-circular blade profile. © 2021 Elsevier Ltd
URI: https://doi.org/10.1016/j.oceaneng.2021.108689
http://idr.nitk.ac.in/jspui/handle/123456789/15441
Appears in Collections:1. Journal Articles

Files in This Item:
There are no files associated with this item.


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.