![](/jspui/image/dspace_header.jpg)
Please use this identifier to cite or link to this item:
https://idr.l1.nitk.ac.in/jspui/handle/123456789/8297
Title: | Influence of Drilling Parameters on Torque during Drilling of GFRP Composites Using Response Surface Methodology |
Authors: | Mohan, N.S. Kulkarni, S.M. |
Issue Date: | 2018 |
Citation: | Journal of Physics: Conference Series, 2018, Vol.953, 1, pp.- |
Abstract: | Polymer based composites have marked their valuable presence in the area of aerospace, defense and automotive industry. Components made of composite, are assembled to main structure by fastener, which require accurate, precise high quality holes to be drilled. Drilling the hole in composite with accuracy require control over various processes parameters viz., speed, feed, drill bit size and thickens of specimen. TRIAC VMC machining center is used to drill the hole and to relate the cutting and machining parameters on the torque. MINITAB 14 software is used to analyze the collected data. As a function of cutting and specimen parameters this method could be useful for predicting torque parameters. The purpose of this work is to investigate the effect of drilling parameters to get low torque value. Results show that thickness of specimen and drill bit size are significant parameters influencing the torque and spindle speed and feed rate have least influence and overlaid plot indicates a feasible and low region of torque is observed for medium to large sized drill bits for the range of spindle speed selected. Response surface contour plots indicate the sensitivity of the drill size and specimen thickness to the torque. � Published under licence by IOP Publishing Ltd. |
URI: | http://idr.nitk.ac.in/jspui/handle/123456789/8297 |
Appears in Collections: | 2. Conference Papers |
Files in This Item:
There are no files associated with this item.
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.